Installation instructions
To install a print cartridge
1.
Press the
Power
button to turn on the printer.
2.
Open the printer cover.
The print cartridge carriage moves to the right side of the printer.
3.
Push down on the print cartridge.
Install print cartridges
53
Maintenance
4.
Slide the print cartridge out of the carriage.
1 Press the Power button
2 Open the printer cover
3 Push down on the print cartridge
4 Slide the print cartridge out of the carriage
5.
Remove the replacement print cartridge from its packaging and carefully remove the
plastic tape. Hold the print cartridge so that the copper strip is on the bottom and
facing toward the printer.
1 Remove plastic tape
CAUTION:
Do not touch the print cartridge ink nozzles or copper contacts.
Touching these parts will result in clogs, ink failure, and bad electrical connections.
Do not remove the copper strips. They are required electrical contacts.
Chapter 9
54
Maintenance
Mainte
nance
1 Ink nozzles
2 Copper contacts
6.
Slide the print cartridge firmly into the carriage at a slight upward angle until you feel
resistance.
7.
Push the cartridge into the carriage.
You hear a snap when the print cartridge is correctly positioned.
8.
Close the printer cover.
9.
Align the print cartridges for optimum print quality. For more information, see
Align
print cartridges
.
For information about storing print cartridges, see
Maintain print cartridges
.
For information about recycling empty print cartridges, see
HP inkjet supplies recycling
program
.
WARNING!
Keep both new and used print cartridges out of the reach of children.